Known for the premium accessories lineup for Apple’s devices, today it has announced to launch the mount in Magsaf, which is designed to keep the magsph charger and to protect it at a desk.
The MAGSAFE Mount is made from a solid block of stainless steel with satin finish painted. There is a cutout on the top that fits an emagsafee charger with the micros additions tape. Below is a soft rubber protected your desk, but it is just a mount – you need to provide your own emagsafee charger.
I was surprised when I was able to connect my iPhone to Magsafe Mount for some time when I was still able to connect my iPhone for some time. Magsfe mount is a half of a mount weighing a half and I thought it would put it on the desk, but if you caught your iphone in a specific way, the mount could come with iPphonee.
The charger is to confirm your iphone selection with the hanging edge or somewhat twisting, which is probably the way many people do. You can also use a finger at the bottom to make a gesture of pri -up when you pull it, which is natural than listening to it. I usually pick up my iphone with a side pull, but I don’t expect that emagsafe power.
Not only to worry about it, I just closed my desk on the weekend a few times on the weekend, so it was not a problem running as long as I remember how I was picking up it. Since the Emagsafe Mount is so heavy, I am concerned that one day I picked it up and crashed it to my desk.
I had just kept the Magagsafe mount for a few days, so I didn’t have time to decide if anything was about to disturb me over time during everyday use. I suspect that most people will be accustomed to pick an iphone from the Magsafe Mount with a finger from the top or below or next to the side and it will not be a problem.
If I wish I was willing to use the same microsciation material used inside the outer outer outer outer the MAGSAFE Mount to give the mount a more powerful attachment to a desk or table so that there would be no problem with some circumstances.
The MAGSAFE Mount design made the EMAGSAFEE charger it is difficult to secure in place and it is it Truly There This is an incredibly tight fit, so it is not an accessory that you want to take and close a magmagsafe charger. The interior microsction adhesive makes it stronger to close it and try to get it out of my thumb to have a hit on my thumb.
Since the Emagsafe charger fits so tightly inside the magmagsafe mount, it looks great. It is difficult to say that it is similar to a single piece of hardware instead of attachment and it has two pieces. It is well machineized and fits it properly. The USB-C Cable in the design is on a channel in the middle and bottom, which contributes to the flowing design.
The way the Cord of the UMAGSAFE charger moves to the MAGSAFE mount has given me some concern for its impact on the cord life. The way the MAGSAFE mount is designed creates a slight bend in the cord because of the angle that inserts it on the device, and this specific spot is sometimes a point of failure for Apple cables. I’m not sure I have any defective EMAGSAFE mounts or if I have done something unusual or pulling it it is something to be aware.
Bottom line
For $ 50, the Magsaf Mount is an expensive addition to an Emagsafee charger, which is $ 40 in total, but it has a decided Apple-Ask design that is well matched with the design of MAG Magseff Charger.
Those who are looking for a permanent desk mounting option may want to consider the magmagsafe mount, but it will not be appropriate for any solution seekers that make the magmagsafe charger easier to move in place.
How to buy
The UMAGSAFE Mount can be purchased for $ 50 from the travel website but our readers can Save 20 percent Enters the code Macrumors At the checkout. This makes the MAGSAFE Mount $ 39.96.
Note: For this review, the purpose of this review is provided with a magaggsafe mount of macrumors. No other compensation was found. An authorized partner with macrumors traveling. When you click a link and make a purchase, we can pay a small payment, which helps our site continue.
